Difference between revisions of "Documents"

From Velocity Aircraft Wiki
Jump to navigation Jump to search
Line 6: Line 6:
 
[[Media:AirVentureCupWatson2005.pdf|Airventure Article by Jack Watson]]<br/>
 
[[Media:AirVentureCupWatson2005.pdf|Airventure Article by Jack Watson]]<br/>
 
[[Media:AirOilSeparator.doc|Air/Oil Separator Article by Don White]]<br/>
 
[[Media:AirOilSeparator.doc|Air/Oil Separator Article by Don White]]<br/>
[[Media:Experimental Maintenance.pptx|Experimental Maintenance]]<br/>
+
[[Media:Experimental Maintenance.ppt|Experimental Maintenance]]<br/>
  
 
== MT Prop Hub Rebuild ==
 
== MT Prop Hub Rebuild ==

Revision as of 19:33, 22 November 2011

2008 Airventure BBQ Yearbook

General

IO540 Type Certificate
O540 Type Certificate
Airventure Article by Jack Watson
Air/Oil Separator Article by Don White
Experimental Maintenance

MT Prop Hub Rebuild

For detailed instructions on hub rebuild go here, or you can download a MS Word version to print: MT Prop Hub Maintenance

Flying

VNE Article
Flying with an Open Door
Flying the Velocity IFR
A nice write-up of Terry Miles very long (real) cross-country adventure.
Here is a rundown on the first "Velocity Midwest" flyin!

Koch Chart for Density Altitude Performance
Crosswind Chart

Weight and Balance

Dale Alexander and Ronnie Brown       WB_Dave_Bertram_05-13-2006.xls          Christopher Martin and Brett Ferrell

NACA Ducts

nacascoop1.xls
Andy Millin
NACA Article SA 12-01.pdf

AC 43.13 Acceptable Methods

Cover Purpose Table of Contents
.
CH1.1: Wood Structure Ch1.2: Health and Safety CH.3: Inspection CH1.4A: Repairs CH1.4B: Repairs Continued
CH1.5: Finishing
.
CH2.1: Fabric Covering Ch2.2: Dope Ch2.3: Inspection CH2.4: Repairs
.
Ch3.1: Composites Ch3.2: Metal Sandwich Repair CH3.3: Transparent Plastics Ch3.4: Windshields
.
.
CH4.1: Metal Structure CH4.2: Testing CH4.3: Precautions Ch4.4: Repair CH4.5: Welding
CH4.6: Welding Safety
.
CH5.1: ND Testing CH5.2: Visual Inspection CH5.3: Eddy Current CH5.4: Magnetic Particle CH5.5: Penetrant Inspection
CH5.6: X-Ray Inspection CH5.7:Untrasonic Inspection CH5.8: Tap Testing
.
CH6.1: Corrosion Inspection CH6.2: Types of Corrosion CH6.3:Corrosion Protection CH6.4: Corrosion Maintenance CH6.5: Visual Inspection
CH6.6: Corrosion Removal CH6.7: Corrosion Removal CH6.8: Aluminum CH6.9: Magnesium CH6.10: Ferrous Metals _- CH6.11: Other Metals CH6.12: Plated Parts CH6.13: Corrosion Proofing CH6.14: Water Immersion
.
CH7.1: Aircraft Hardware CH7.2: Screws CH7.3: Bolts CH7.4: Nuts CH7.5: Washers
CH7.6: Pins CH7.7: Safteying CH7.8: Control Cables CH7.9: Turnbuckles CH7.10: Turnbuckle Safety
CH7.11: Hardware Identification
.
CH8.1: Engines, prop, fuel CH8.2: Fuel CH8.3: Exhaust CH8.4: Repairing Metal Props CH8.5: Inspecting Propellers
CH8.6: Propeller Tracking
.
CH9.1: Aircraft Systems CH9.2: Hydraulic Systems CH9.3: Emergency Equipment CH9.4: Cabin Interior
.
CH10.1: Weight and Balance CH10.2: Weighing Procedures
.
CH11.1: Electrical Systems CH11.2: Storage Batteries CH11.4: Circuit Protection CH11.5: Wire Rating CH11.6: Wire Selection
CH11.7: Acceptable Wire CH11.8: Wire Installation CH11.9: Electrical Inspection CH11.10: Service Loop CH11.11: Clamping
.
CH11.12: Wire Insulation CH11.13: Splicing CH11.14: Terminal Repairs CH11.15: Bonding CH11.16: Wire Marking
CH11.17: Connectors CH11.18: Conduits CH11.19: Unused Connectors CH11.20: Electrical Symbols
.
CH12.1: Avionics CH12.2: Ground Checks CH12.3: Ground Checks 2 CH12.4: Test Equipment Glossary