Epoxy Pump

From Velocity Aircraft Wiki
Jump to navigation Jump to search
Michaels "Sticky Stuff" Dispenser

General Description

This highly recommended pump, aptly called Sticky-Stuff Dispenser, will save about 50.00 in epoxy in building a VE type aircraft, plus time, mess, dermatitis, temper and risk of bad batches.

Velocity Use

Used for mixing EZ poxy, the primary structural epoxy in 44|100 ratio. These are highly recommended, they work well and save a huge amount of time and worry.

Packaging Weights

1 ea. Aircraft Spruce

Directions for Use

Pour epoxy and resin into the appropriate bins. Keep warm, preferably in a hotbox, and use before it goes bad (months). If you're going to be away from the project for an extended period of time, or if the pump will not be kept above 70-75 degrees F, it's advisable to pump it empty, and clean with alcohol for storage.

Safety and Handling

See MSDS for the epoxy in use.