5 Minute Epoxy - Revision history

Admin: 7 revisions

2010-08-20T18:14:02Z

7 revisions

Bferrell at 18:05, 15 May 2008

2008-05-15T18:05:54Z

Bferrell at 18:04, 15 May 2008

2008-05-15T18:04:52Z

Bferrell at 18:04, 15 May 2008

2008-05-15T18:04:23Z

Bferrell at 17:48, 15 May 2008

2008-05-15T17:48:01Z

Bferrell at 17:36, 15 May 2008

2008-05-15T17:36:14Z

Bferrell at 17:23, 15 May 2008

2008-05-15T17:23:13Z

Bferrell: New page: http://www.aircraftspruce.com/catalog/wppages/quickcure.php

2008-05-15T17:22:47Z

New page: http://www.aircraftspruce.com/catalog/wppages/quickcure.php

New page

http://www.aircraftspruce.com/catalog/wppages/quickcure.php

@@ Line 5: / Line 5: @@
 == Velocity Use ==
-This is a 2 part epoxy that can be very handy to hold parts (particularly metal) in place until they can be permanently bonded, whether this is to drill and bolt down or lay-up over.  Mix 1:1 by weight or volume.<br><br>
+This is a 2 part epoxy that can be very handy to hold parts (particularly metal) in place until they can be permanently bonded, whether this is to drill and bolt down or lay-up over.  Mix 1:1 by weight or volume.<br/>
 == Product Description ==
-An easy to use, 2-part resin/hardener system for quick repairs, tooling and general bonding. May be used in spot applications to hold parts in position while standard epoxy bonds cure. Bonds to wood, fiberglass and metal. Not recommended for long-term bonds subject to high loads or moisture. One-to-one mixture, no pumps are required. Cures in 3-5 minutes.
+An easy to use, 2-part resin/hardener system for quick repairs, tooling and general bonding. May be used in spot applications to hold parts in position while standard epoxy bonds cure. Bonds to wood, fiberglass and metal. Not recommended for long-term bonds subject to high loads or moisture. One-to-one mixture, no pumps are required. Cures in 3-5 minutes.<br/>
--16 16 fl. oz. resin/16 fl. oz. hardener.
+-16 16 fl. oz. resin/16 fl. oz. hardener.<br/>
--4 4 fl. oz. resin/4 fl. oz. hardener.
+-4 4 fl. oz. resin/4 fl. oz. hardener.<br/>
 == Packaging Weights ==
 This epoxy is available at [http://www.jamestowndistributors.com/userportal/show_product.do?pid=3756 Jamestown Distributors] in 4 and 16 oz sizes.
 == Directions for Use ==
 PREPARATION: All surfaces to be bonded or patched must be free of dirt, oil and grease. Dispense equal quantities of the resin and hardener, mix thouroghly, and apply to part to be joined.
 == Safety and Handling ==
-Here are the MSDS sheets for both the resin and the hardener.
+Here are the MSDS sheets for both the resin and the hardener.<br/>
 [[Media:MSDS865A.pdf|MSDS Part A]]<br/>
 [[Media:MSDS865B.pdf|MSDS Part B]]<br/>

@@ Line 27: / Line 27: @@
 Here are the MSDS sheets for both the resin and the hardener.
-[[Media:xxxx]]<br/>
+[[Media:MSDS865A.pdf|MSDS Part A]]<br/>
-[[Media:xxxx]]<br/>
+[[Media:MSDS865B.pdf|MSDS Part B]]<br/>

@@ Line 9: / Line 9: @@
 == Product Description ==
-ES6228 is a thin paste viscosity epoxy adhesive designed to provide good bonds to metal surfaces. A
+An easy to use, 2-part resin/hardener system for quick repairs, tooling and general bonding. May be used in spot applications to hold parts in position while standard epoxy bonds cure. Bonds to wood, fiberglass and metal. Not recommended for long-term bonds subject to high loads or moisture. One-to-one mixture, no pumps are required. Cures in 3-5 minutes.
-== Product Specifications ==
+== Packaging Weights ==
-== Packaging Weights ==
+This epoxy is available at [http://www.jamestowndistributors.com/userportal/show_product.do?pid=3756 Jamestown Distributors] in 4 and 16 oz sizes.
 == Directions for Use ==
-PREPARATION: All sur faces to be bonded or patched must be free of dirt, oil and grease. The ability of
+PREPARATION: All surfaces to be bonded or patched must be free of dirt, oil and grease. Dispense equal quantities of the resin and hardener, mix thouroghly, and apply to part to be joined.
 == Safety and Handling ==
-PTM&W epoxy  Keep tools clean and properly stored. Dispose of trash and empty containers properly. Do not use any of these types of products
+Here are the MSDS sheets for both the resin and the hardener.
-until Material Safety Data Sheets have been read and understood.
+[[Media:xxxx]]<br/>

@@ Line 1: / Line 1: @@
 [[Image:quickcure.jpg|right]]
 == General Description ==
+West System G/5 Five-Minute Adhesive is an easy to use, 2-part resin/hardener system for quick repairs, tooling and general bonding, May be used in spot applications to hold parts in position while standard epoxy bonds cure.&nbsp;&nbsp;Bonds to wood, fiberglass and metal.&nbsp;&nbsp;Not recommended for long-term bonds subject to high loads or moisture.&nbsp;&nbsp;One to one mixture, no pumps are required.&nbsp;&nbsp;Cures in 3 to 5 minutes.&nbsp;&nbsp;This is supplied in the kit and is used for quick bonding to hold parts in position for permanent lay-ups.&nbsp;&nbsp;It will not dissolve the blue foam.
 == Velocity Use ==

← Older revision		Revision as of 17:36, 15 May 2008
Line 1:		Line 1:
		+	[[Image:quickcure.jpg\|right]]
		+	== General Description ==

−	~~this~~ is supplied in the kit and is used for quick bonding to hold parts in position for permanent lay-ups. It will not dissolve the blue foam.	+	Quick Cure is a 5 minute epoxy from System Three which bonds wood, metals, fiberglass, ceramics, plastics and glass.  Excellent for making quick repairs, as it hardens in 5 minutes at room temperature.  Mixing ratio: 1 to 1.  Not recommended for applications in excess of 200F.  This is supplied in the kit and is used for quick bonding to hold parts in position for permanent lay-ups.  It will not dissolve the blue foam.

		+	== Velocity Use ==

−	http://www.aircraftspruce.com/catalog/wppages/quickcure.php	+	This is a 2 part epoxy that can be very handy to hold parts (particularly metal) in place until they can be permanently bonded, whether this is to drill and bolt down or lay-up over. Mix 1:1 by weight or volume.<br><br>
		+
		+	== Product Description ==
		+
		+	ES6228 is a thin paste viscosity epoxy adhesive designed to provide good bonds to metal surfaces. A
		+
		+
		+	== Product Specifications ==
		+
		+	ES6228 A ES6228 B ASTM Method
		+
		+
		+	== Packaging Weights ==
		+
		+	This epoxy is available at [http://www.aircraftspruce.com/catalog/wppages/quickcure.php Aircraft Spruce] in the following kit sizes.
		+	{\|
		+	!Description
		+	!Part No.
		+	\|-
		+	\|SYS 3 QUICK CURE EPOXY KT (PT)
		+	\|02-30060
		+	\|-
		+	\|SYS 3 QUICK CURE EPOXY KT (QT)
		+	\|02-30065
		+	\|}
		+
		+	== Directions for Use ==
		+
		+	PREPARATION: All sur faces to be bonded or patched must be free of dirt, oil and grease. The ability of
		+
		+	== Typical Mechanical Properties ==
		+
		+	ES6228 A/B ASTM Method
		+
		+
		+	== Safety and Handling ==
		+
		+	PTM&W epoxy Keep tools clean and properly stored. Dispose of trash and empty containers properly. Do not use any of these types of products
		+	until Material Safety Data Sheets have been read and understood.

← Older revision	Revision as of 18:14, 20 August 2010
(No difference)

← Older revision		Revision as of 17:23, 15 May 2008
Line 1:		Line 1:
		+
		+	this is supplied in the kit and is used for quick bonding to hold parts in position for permanent lay-ups. It will not dissolve the blue foam.
		+

	http://www.aircraftspruce.com/catalog/wppages/quickcure.php		http://www.aircraftspruce.com/catalog/wppages/quickcure.php