Fuselage - Revision history

AndyMillin at 19:00, 29 January 2019

2019-01-29T19:00:35Z

AndyMillin at 18:59, 29 January 2019

2019-01-29T18:59:28Z

AndyMillin at 18:58, 29 January 2019

2019-01-29T18:58:10Z

AndyMillin: /* Plastic Cable Tie Mounts */

2019-01-29T18:41:22Z

Plastic Cable Tie Mounts

AndyMillin at 18:40, 29 January 2019

2019-01-29T18:40:45Z

AndyMillin: /* Velcro Tie */

2019-01-29T18:37:16Z

Velcro Tie

AndyMillin: /* Velcro Tie Mounts */

2019-01-29T18:36:59Z

Velcro Tie Mounts

AndyMillin at 18:35, 29 January 2019

2019-01-29T18:35:57Z

AndyMillin at 18:33, 29 January 2019

2019-01-29T18:33:01Z

AndyMillin: Created page with "Securing Wire Bundles"

2019-01-29T17:46:21Z

Created page with "Securing Wire Bundles"

New page

Securing Wire Bundles

@@ Line 68: / Line 68: @@
 </gallery>
-Clickbond specializes in bonded fastners.  Some might find their products pricey. They are high quality.  Discounts can be had by purchasing in quantity and at Oshkosh.  The come with their own epoxy based adhesive.
+Clickbond specializes in bonded fastners.  Some might find their products pricey. They are high quality.  Quantity discounts are available.  They come with their own epoxy based adhesive.
 [https://www.clickbond.com/ clickbond.com]

@@ Line 68: / Line 68: @@
 </gallery>
-Clickbond specializes in bonded fastners.  Although some might find their products on the pricey side they are first rate quality.  Discounts can be had by purchasing in quantity and at Oshkosh.  The come with their own epoxy based adhesive.
+Clickbond specializes in bonded fastners.  Some might find their products pricey. They are high quality.  Discounts can be had by purchasing in quantity and at Oshkosh.  The come with their own epoxy based adhesive.
 [https://www.clickbond.com/ clickbond.com]

← Older revision		Revision as of 18:58, 29 January 2019
Line 61:		Line 61:

	Reiff Lorenz.		Reiff Lorenz.
		+
		+	=== Click Bond ===
		+
		+	<gallery>
		+	Image:Clickbond.jpg
		+	</gallery>
		+
		+	Clickbond specializes in bonded fastners. Although some might find their products on the pricey side they are first rate quality. Discounts can be had by purchasing in quantity and at Oshkosh. The come with their own epoxy based adhesive.
		+
		+	[https://www.clickbond.com/ clickbond.com]

@@ Line 14: / Line 14: @@
 Cable tie mounts are cheap and readily available.  They can be purchased with or without an adhesive back.
-The adhesive backed mounts require a very clean surface before application.  Even under perfect circumstances they can come release over time.
+The adhesive backed mounts require a very clean surface before application.  Even under perfect circumstances they can release over time.
 Builders have had success by pop-riveting them on.  Others have removed the adhesive pad and potted them in place with epoxy.

@@ Line 7: / Line 7: @@
 There are a number of ways to secure wire bundles.  Most involve cable/zip ties or Velcro.
-=== Adhesive Backed Cable Tie Mounts ===
+=== Plastic Cable Tie Mounts ===
 <gallery>
 Image:Adhesive cable tie mount.jpg

@@ Line 45: / Line 45: @@
 Renè Dugas. <blockquote>Have made angle fiberglass of 3 layers of bid with two holes drilled for zip ties. Made mine by clamping a 2x4 to to a flat surface then applied a layer of aluminum duct tape to the flat surface and the vertical edge of the 2x4. Aluminum tape is just smoother than regular duct tape. The layup is placed in the angle and allowed to cure. It then easily pops off when the 2x4 is removed. The resulting “L” channel is cut with a band saw into the height and width desired. More layers can be applied to make stronger “L” brackets for tubing and other supports. These brackets were kept in a box for trimming and applied when needed a where needed with the edges and corners sanded.</blockquote>
-=== Velcro Tie ===
+=== Velcro Ties ===
 Velcro also works well.

← Older revision		Revision as of 18:33, 29 January 2019
Line 1:		Line 1:
−	Securing Wire ~~Bundles~~	+	Fuselage Tips
		+
		+	__TOC__
		+
		+	== Securing Wires ==
		+
		+	There are a number of ways to secure wire bundles. Most involve cable/zip ties or Velcro.
		+
		+	=== Adhesive Backed Cable Tie Mounts ===
		+	<gallery>
		+	Image:Adhesive cable tie mount.jpg
		+	</gallery>
		+	Cable tie mounts are cheap and readily available. The adhesive backed mounts require a very clean surface before application. Even under perfect circumstances they can come release over time.
		+
		+	Builders have had success by pop-riveting them on. Others have removed the adhesive pad and potted them in place with epoxy.
		+
		+
		+
		+	=== Panduit Tie Mounts===
		+	<gallery>
		+	Image:Panduit.JPG
		+	</gallery>
		+
		+	Don Johnston used these. They are available on Amazon. Search for part MBMS-S10-CY. Don attached them with structural adhesive.
		+
		+	=== Fiberglass Tie Mounts ===
		+
		+	You can fabricate tie mounts out of scrap glass cloth.
		+
		+	<gallery>
		+	Image:Jones wire secure 1.JPG\|Bond in place
		+	Image:Jones wire secure 2.JPG\|Hold wires with zip ties
		+	Image:Jones wire secure 3.JPG\|Glass laid over wire form
		+	Image:Jones wire secure 4.JPG\|Wire form
		+	Image:Jones wire secure 5.JPG\|Cut into sections
		+	</gallery>
		+
		+	Nick Jones. <blockquote>A friend of mine, Marco Crivellari turned me onto these. I think he got the idea from Nick Ugolini at rough river. You can make then out of scrap fiberglass.</blockquote>
		+
		+	<gallery>
		+	Image:Dugas wire secure 1.JPG
		+	</gallery>
		+
		+	Renè Dugas. <blockquote>Have made angle fiberglass of 3 layers of bid with two holes drilled for zip ties. Made mine by clamping a 2x4 to to a flat surface then applied a layer of aluminum duct tape to the flat surface and the vertical edge of the 2x4. Aluminum tape is just smoother than regular duct tape. The layup is placed in the angle and allowed to cure. It then easily pops off when the 2x4 is removed. The resulting “L” channel is cut with a band saw into the height and width desired. More layers can be applied to make stronger “L” brackets for tubing and other supports. These brackets were kept in a box for trimming and applied when needed a where needed with the edges and corners sanded.</blockquote>
		+
		+	=== Velcro Tie Mounts ===
		+
		+	Velcro also works well.
		+
		+	<gallery>
		+	Image:Velcro wrap 3.JPG
		+	</gallery>
		+
		+	Jorge Bujanda wrote an article explaining how he used it in the Fall 2017 Velocity News (Screwless Cable Ties). Jorge bonded the "fuzzy" size of the Velcro to the surface using 5-minute epoxy.
		+
		+	<gallery>
		+	Image:Velcro wrap 1.JPG
		+	Image:Velcro wrap 2.JPG
		+	</gallery>
		+
		+	Reiff Lorenz.