Difference between revisions of "Cowl Inlet Door"
Jump to navigation
Jump to search
m |
m (7 revisions) |
||
| (2 intermediate revisions by one other user not shown) | |||
| Line 4: | Line 4: | ||
I had the same problem years ago and solved it with a variable inlet. I live in Dallas and summer time climbs were brutal, but later, cruise temps were too cold. I have a NACA scoop on the bottom though. Heres a drawing of what I did 18years ago.... By the way if in cruise, and your cylinders are too cold, your openings are too large. | I had the same problem years ago and solved it with a variable inlet. I live in Dallas and summer time climbs were brutal, but later, cruise temps were too cold. I have a NACA scoop on the bottom though. Heres a drawing of what I did 18years ago.... By the way if in cruise, and your cylinders are too cold, your openings are too large. | ||
| − | Vance Atkinson | + | Vance Atkinson<br/> |
EAA Tech and Flt Advisor | EAA Tech and Flt Advisor | ||
<gallery> | <gallery> | ||
Image:Cowl_inlet_door538.jpg | Image:Cowl_inlet_door538.jpg | ||
| − | |||
</gallery> | </gallery> | ||
Latest revision as of 18:04, 20 August 2010
Cylinder head temp problems are not unusual, but I have a different twist. My CHT's are too cool. I can only recall once or twice that a cylinder head ever got to 400F. Most run 350F to 390F during hot, hard climbs, but at cruise, and running lean of peak, it's not unusual for 2 to be below 300F and the rest just barely over 300F.
I had the same problem years ago and solved it with a variable inlet. I live in Dallas and summer time climbs were brutal, but later, cruise temps were too cold. I have a NACA scoop on the bottom though. Heres a drawing of what I did 18years ago.... By the way if in cruise, and your cylinders are too cold, your openings are too large.
Vance Atkinson
EAA Tech and Flt Advisor
