Documents

IO540 Type Certificate
O540 Type Certificate
Airventure Article by Jack Watson
Air/Oil Separator Article by Don White
Koch Chart
Crosswind Chart

Weight and Balance

Dale Alexander and Ronnie Brown

NACA Ducts

Media:nacascoop1.xls
Andy Millin
Media:NACA Article SA 12-01.pdf

AC 43.13 Acceptable Methods

Cover	Purpose	Table of Contents
.
CH1.1: Wood Structure	Ch1.2: Health and Safety	CH.3: Inspection	CH1.4A: Repairs	CH1.4B: Repairs Continued
CH1.5: Finishing
.
CH2.1: Fabric Covering	Ch2.2: Dope	Ch2.3: Inspection	CH2.4: Repairs
.
Ch3.1: Composites	Ch3.2: Metal Sandwich Repair	CH3.3: Transparent Plastics	Ch3.4: Windshields
.
.
CH4.1: Metal Structure	CH4.2: Testing	CH4.3: Precautions	Ch4.4: Repair	CH4.5: Welding
.
CH5.1: ND Testing	CH5.2: Visual Inspection	CH5.3: Eddy Current	CH5.4: Magnetic Particle	CH5.5: Penetrant Inspection
CH5.6: X-Ray Inspection	CH5.7:Untrasonic Inspection	CH5.8: Tap Testing
.
CH6.1: Corrosion Inspection	CH6.2: Types of Corrosion
.
CH6.3:Corrosion Protection	CH6.4: Corrosion Maintenance	CH6.5: Visual Inspection	CH6.6: Corrosion Removal	CH6.7: Corrosion Removal
.
CH6.8: Aluminum	CH6.9: Magnesium	CH6.10: Ferrous Metals	CH6.11: Other Metals	CH6.12: Plated Parts
CH6.13: Corrosion Proofing	CH6.14: Water Immersion
.
CH7.1: Aircraft Hardware	CH7.2: Screws	CH7.3: Bolts	CH7.4: Nuts	CH7.5: Washers
CH7.6: Pins	CH7.7: Safteying	CH7.8: Control Cables	CH7.9: Turnbuckles	CH7.10: Turnbuckle Safety
CH7.11: Hardware Identification
.
CH8.1: Engines, prop, fuel	CH8.2: Fuel	CH8.3: Exhaust	CH8.4: Repairing Metal Props	CH8.5: Inspecting Propellers
CH8.6: Propeller Tracking
.
CH9.1: Aircraft Systems	CH9.2: Hydraulic Systems	CH9.3: Emergency Equipment	CH9.4: Cabin Interior
.
CH10.1: Weight and Balance	CH10.2: Weighing Procedures
.
CH11.1: Electrical Systems	CH11.2: Storage Batteries	CH11.4: Circuit Protection	CH11.5: Wire Rating	CH11.6: Wire Selection
CH11.7: Acceptable Wire	CH11.8: Wire Installation	CH11.9: Electrical Inspection	CH11.10: Service Loop	CH11.11: Clamping
.
CH11.12: Wire Insulation	CH11.13: Splicing	CH11.14: Terminal Repairs	CH11.15: Bonding	CH11.16: Wire Marking
CH11.17: Connectors	CH11.18: Conduits	CH11.19: Unused Connectors	CH11.20: Electrical Symbols
CH12.1: Avionics	CH12.2: Ground Checks	CH12.3: Ground Checks 2	CH12.4: Test Equipment	Glossary