Door Gas Springs

An interesting conversation on gas door springs, and how to find ones that have good holding position over time without distorting the doors.

Andy Millin

 I think it is time to replace the gas springs on my doors.

 
 I have seen recommendations for gas springs, but never wrote them down.  Is anyone using something other than stock?


 My current springs are labeled:  AVM SE850V-40PE
 SE    Standard extension damped spring
 850   Stroke (8.50 inches)
 V     Rod and Tube size (8mm x 22mm)
 40    P1 force (pounds)
 PE    ???

 I've also seen these locking gas springs at McMaster.  A little pricey, but, if they won't come down while I'm taxiing ... 
 with a wind gust ... over bumpy ground...  Because they are locking, the wouldn't need to be extra strong.
 
 Andy

and

 I just spent time chatting with a very nice guy from Bansbach Easylift.  He is an Aerospace Engineer.  He wanted to know everything about the
 application.  He wants to walk me through the process and then help me with a recommendation.  We'll see what he comes up with.

Jorge Bujanda

 I use the 65 lbs
 Door Gas Springs   
 Model #: GS08-0950PE10-049 (Force: 49 lbs)  or          
 Model #: GS08-0950PE10-065 (Force: 65 lbs)
 Gas Spring:  Rod- 8mm / Tube- 19mm / Stroke- 9.5”  Plastic Ends-10mm / Length- 23.03” 
 Austin Hardware and Supply

Reiff Lorenz

 Here is the label off the door gas springs I got from the factory 2 years ago. I've installed them and they work, 
 but my doors don't yet have any interior upholstery or trim on them.
 

 Genesis by Stabilus
 AustinHardware.com   1-800-821-3520
 6306UK  0220N  172/11 G
 

 The overall length is about 24" (6306 mm?). If the 0220N label means 220 newtons, that's ~50 lbs of force.

• 
• 

General Picture Gallery

•