Difference between revisions of "Cowl Inlet Door"
Jump to navigation
Jump to search
| Line 6: | Line 6: | ||
Vance Atkinson | Vance Atkinson | ||
EAA Tech and Flt Advisor | EAA Tech and Flt Advisor | ||
| + | [[Image:Cowl_inlet_thumb.jpg|right]] | ||
<gallery> | <gallery> | ||
Image:Cowl_inlet_door538.jpg | Image:Cowl_inlet_door538.jpg | ||
| + | Image:Cowl_inlet_thumb.jpg | ||
</gallery> | </gallery> | ||
Revision as of 17:15, 9 June 2009
Cylinder head temp problems are not unusual, but I have a different twist. My CHT's are too cool. I can only recall once or twice that a cylinder head ever got to 400F. Most run 350F to 390F during hot, hard climbs, but at cruise, and running lean of peak, it's not unusual for 2 to be below 300F and the rest just barely over 300F.
I had the same problem years ago and solved it with a variable inlet. I live in Dallas and summer time climbs were brutal, but later, cruise temps were too cold. I have a NACA scoop on the bottom though. Heres a drawing of what I did 18years ago.... By the way if in cruise, and your cylinders are too cold, your openings are too large.
Vance Atkinson EAA Tech and Flt Advisor
