Difference between revisions of "Flocked Cotton (flox)"
(New page: A structural resin filler. The mixture of cotton fiber and epoxy is referred to as "flox". The mixture is used in structural joints and in areas where a very hard, durable buildup is requi...) |
|||
| Line 1: | Line 1: | ||
| − | A structural resin filler. The mixture of cotton fiber and epoxy is referred to as "flox". The mixture is used in structural joints and in areas where a very hard, durable buildup is required. Flox is mixed in much the same way as dry micro but only about two parts flock to one part epoxy is required. Mix in just enough flock to make the mixture stand up. If "wet flox" is called out, mix it so it will sag or run. Flox is often used to reinforce a sharp corner. Paint a light coat of pure epoxy inside the corner, trowel flox in to make a triangular support. The flox corner is done just before one glass surface is applied for a wet bond to one surface. | + | |
| + | |||
| + | [[Image:flox.jpg|right|thumb|EZ84 Epoxy]] | ||
| + | == General Description == | ||
| + | A structural resin filler. The mixture of cotton fiber and epoxy is referred to as "flox". The mixture is used in structural joints and in areas where a very hard, durable buildup is required. Flox is mixed in much the same way as dry micro but only about two parts flock to one part epoxy is required. Mix in just enough flock to make the mixture stand up. If "wet flox" is called out, mix it so it will sag or run. Flox is often used to reinforce a sharp corner. Paint a light coat of pure epoxy inside the corner, trowel flox in to make a triangular support. The flox corner is done just before one glass surface is applied for a wet bond to one surface.<br/> | ||
| + | |||
| + | == Velocity Use == | ||
| + | EZ-84 is the primary structural epoxy for the Velocity kit. All structural glass lay-ups are preformed with this system, such as wings, fuselage, etc.<br/> | ||
| + | |||
| + | == Product Description == | ||
| + | From the [http://aircraftspruce.com/catalog/cmpages/ezpoxy.php Aircraft Spruce] website:<br/> | ||
| + | |||
| + | == Product Specifications == | ||
| + | From the [http://aircraftspruce.com/catalog/cmpages/ezpoxy.php Aircraft Spruce] website: <br/> | ||
| + | |||
| + | |||
| + | == Packaging Weights == | ||
| + | EZ-84 is typically | ||
| + | |||
| + | |||
| + | == Directions for Use == | ||
| + | |||
| + | Temperature is critical | ||
| + | |||
| + | == Safety and Handling == | ||
| + | Here are the manufacturer's Material Safety Data Sheets.<br/> | ||
| + | [[Media:EZ-83_84_87.pdf]] | ||
Revision as of 14:46, 16 May 2008
Contents
General Description
A structural resin filler. The mixture of cotton fiber and epoxy is referred to as "flox". The mixture is used in structural joints and in areas where a very hard, durable buildup is required. Flox is mixed in much the same way as dry micro but only about two parts flock to one part epoxy is required. Mix in just enough flock to make the mixture stand up. If "wet flox" is called out, mix it so it will sag or run. Flox is often used to reinforce a sharp corner. Paint a light coat of pure epoxy inside the corner, trowel flox in to make a triangular support. The flox corner is done just before one glass surface is applied for a wet bond to one surface.
Velocity Use
EZ-84 is the primary structural epoxy for the Velocity kit. All structural glass lay-ups are preformed with this system, such as wings, fuselage, etc.
Product Description
From the Aircraft Spruce website:
Product Specifications
From the Aircraft Spruce website:
Packaging Weights
EZ-84 is typically
Directions for Use
Temperature is critical
Safety and Handling
Here are the manufacturer's Material Safety Data Sheets.
Media:EZ-83_84_87.pdf
