Difference between revisions of "Shea N340XL"

Revision as of 19:38, 28 April 2012

Pat Shea XL/RG

Airworthiness Date: 03/09/2005
Builder: Pat Shea

FH080018.jp
N340XL Instrument Panel
I used 3/8" blue foam covered w/ bid on each side to fabricate the these interior panels. They provide for a baggage area while covering the gear mechanism and other system components. Once upholstered & soundproofed, they will be held in place by velcro for easy removal in flight if necessary.
These perimeter tabs, along w/ the 3' wide aluminum bracket in front of the sump tank, are used to mount the aft interior panels.
Close-up of the angle bracket for the bottom interior shelf panel. The front of the bottom panel is supported by the forward baggage wall

@@ Line 10: / Line 10: @@
 <gallery widths=200px perrow=3>
 Image:N340xl.jpg|N340XL Race40
+Image:FH050011.jpg
+Image:IMG_2435.jpg
 </gallery>
@@ Line 17: / Line 22: @@
 Image:N340xl3.jpg|N340XL
 Image:N340xl4.jpg|N340XL
+Image:IMG_2441.jpg
+Image:IMG_2437.jpg
 </gallery>
@@ Line 22: / Line 32: @@
 == Interior Pictures ==
 <gallery widths=200px perrow=3>
+Image:FH080014.jpg
+Image:FH080015.jpg
+Image:FH080017.jpg
+Image:FH080018.jp
 Image:N340XL_panel.jpg|N340XL Instrument Panel
 Image:Lr_Dscf0022.jpg|I used 3/8" blue foam covered w/ bid on each  side to fabricate the these interior panels. They provide for a baggage  area while covering the gear mechanism and other system components. Once  upholstered & soundproofed, they will be held in place by velcro  for easy removal in flight if necessary.