Difference between revisions of "Mounting Studs great for spar"
Jump to navigation
Jump to search
| Line 16: | Line 16: | ||
=== Andy Millin === | === Andy Millin === | ||
| − | FWIW, I used these. http://www.mcmaster.com/#perforated-base-studs/=vsmgjs | + | FWIW, I used these. [[http://www.mcmaster.com/#perforated-base-studs/=vsmgjs MacMaster Carr Studs]] |
They are about 75 cents a piece. | They are about 75 cents a piece. | ||
Revision as of 21:04, 6 February 2015
These ideas are great for mounting just about anything light and electronic in the airplane, just a couple of different takes.
Contents
Jorge Bujanda
This came to mind as a comment on another topic but think is better to separate it to a different thread. Here is my approach to surface mounting all around my airplane, including the main spar and firewall. It minimized any holes, anywhere, unless necessary. I finished my third annual in December and everything is as tight as when I installed it. Reiff/Stephen, here is newsletter material you can use when convenient. [Jorge's Blog]
Andy Millin
FWIW, I used these. [MacMaster Carr Studs] They are about 75 cents a piece. Andy
