Difference between revisions of "5 Minute Epoxy"
| Line 1: | Line 1: | ||
| + | [[Image:quickcure.jpg|right]] | ||
| + | == General Description == | ||
| − | + | Quick Cure is a 5 minute epoxy from System Three which bonds wood, metals, fiberglass, ceramics, plastics and glass. Excellent for making quick repairs, as it hardens in 5 minutes at room temperature. Mixing ratio: 1 to 1. Not recommended for applications in excess of 200F. This is supplied in the kit and is used for quick bonding to hold parts in position for permanent lay-ups. It will not dissolve the blue foam. | |
| + | == Velocity Use == | ||
| − | http://www.aircraftspruce.com/catalog/wppages/quickcure.php | + | This is a 2 part epoxy that can be very handy to hold parts (particularly metal) in place until they can be permanently bonded, whether this is to drill and bolt down or lay-up over. Mix 1:1 by weight or volume.<br><br> |
| + | |||
| + | == Product Description == | ||
| + | |||
| + | ES6228 is a thin paste viscosity epoxy adhesive designed to provide good bonds to metal surfaces. A | ||
| + | |||
| + | |||
| + | == Product Specifications == | ||
| + | |||
| + | ES6228 A ES6228 B ASTM Method | ||
| + | |||
| + | |||
| + | == Packaging Weights == | ||
| + | |||
| + | This epoxy is available at [http://www.aircraftspruce.com/catalog/wppages/quickcure.php Aircraft Spruce] in the following kit sizes. | ||
| + | {| | ||
| + | !Description | ||
| + | !Part No. | ||
| + | |- | ||
| + | |SYS 3 QUICK CURE EPOXY KT (PT) | ||
| + | |02-30060 | ||
| + | |- | ||
| + | |SYS 3 QUICK CURE EPOXY KT (QT) | ||
| + | |02-30065 | ||
| + | |} | ||
| + | |||
| + | == Directions for Use == | ||
| + | |||
| + | PREPARATION: All sur faces to be bonded or patched must be free of dirt, oil and grease. The ability of | ||
| + | |||
| + | == Typical Mechanical Properties == | ||
| + | |||
| + | ES6228 A/B ASTM Method | ||
| + | |||
| + | |||
| + | == Safety and Handling == | ||
| + | |||
| + | PTM&W epoxy Keep tools clean and properly stored. Dispose of trash and empty containers properly. Do not use any of these types of products | ||
| + | until Material Safety Data Sheets have been read and understood. | ||
Revision as of 17:36, 15 May 2008
Contents
General Description
Quick Cure is a 5 minute epoxy from System Three which bonds wood, metals, fiberglass, ceramics, plastics and glass. Excellent for making quick repairs, as it hardens in 5 minutes at room temperature. Mixing ratio: 1 to 1. Not recommended for applications in excess of 200F. This is supplied in the kit and is used for quick bonding to hold parts in position for permanent lay-ups. It will not dissolve the blue foam.
Velocity Use
This is a 2 part epoxy that can be very handy to hold parts (particularly metal) in place until they can be permanently bonded, whether this is to drill and bolt down or lay-up over. Mix 1:1 by weight or volume.
Product Description
ES6228 is a thin paste viscosity epoxy adhesive designed to provide good bonds to metal surfaces. A
Product Specifications
ES6228 A ES6228 B ASTM Method
Packaging Weights
This epoxy is available at Aircraft Spruce in the following kit sizes.
| Description | Part No. |
|---|---|
| SYS 3 QUICK CURE EPOXY KT (PT) | 02-30060 |
| SYS 3 QUICK CURE EPOXY KT (QT) | 02-30065 |
Directions for Use
PREPARATION: All sur faces to be bonded or patched must be free of dirt, oil and grease. The ability of
Typical Mechanical Properties
ES6228 A/B ASTM Method
Safety and Handling
PTM&W epoxy Keep tools clean and properly stored. Dispose of trash and empty containers properly. Do not use any of these types of products until Material Safety Data Sheets have been read and understood.
