Retract Pump and Cylinder Rebuild

From Velocity Aircraft Wiki
Revision as of 19:42, 7 January 2015 by Admin (talk | contribs)
Jump to navigation Jump to search
Seals.jpg

The RG hydraulic pump rebuild kits seem strangely difficult to locate. There is some good info in the Lancair community. They use the same pump/cylinder system that Velocities do. According to their experts, the only non-standard part in the pump rebuild kit is the poppet valve, so you only need a rebuild kit if the poppet valve is leaking. Usually, you just need these standard O-rings from McMaster:

013-90, Spool Seal (013N90)
014-90, Check Valve Body seal (014N90)
908-70, Hex Plug Seal
908 Durometer 90

For more info, see Lancair builder Chris Zavatson's site: http://www.N91CZ.net

Linked below are his diagrams, explanations, and instructions for rebuilding the hydraulic pump and cylinders.

Rebuilding_Lancair_Hydraulic_Cylinders.pdf
Schematic File:Gear pump schematics and details (Lancair documentation).pdf
File:Rebuilding Lancair Hydraulic Cylinders.pdf

Hyraulic Schematic.jpg


Retrieved from "https://wiki.velocityoba.com/index.php?title=Retract_Pump_and_Cylinder_Rebuild&oldid=10947"