Milled Fiber
Revision as of 14:54, 16 May 2008 by Bferrell (talk | contribs) (New page: right|thumb|Milled Glass Fibers == General Description == As the name implies, this material is made by milling fiberglass into a very thin consistency. This mate...)
Contents
General Description
As the name implies, this material is made by milling fiberglass into a very thin consistency. This material is used in preparing a structural filler. This material is used in fillets that require structural integrity. Milled fiber fillers have higher strength than cotton flock but have fine particles of fiberglass that can penetrate the skin.
Velocity Use
EZ-84 is the primary structural epoxy for the Velocity kit. All structural glass lay-ups are preformed with this system, such as wings, fuselage, etc.
Packaging Weights
Aircraft Spruce sells milled fiber in 1 lbs bags.
Directions for Use
Mix with target epoxy to desired thickness, then apply to prepared surface.
Safety and Handling
Do not inhale.
