Franklin Engine

From Velocity Aircraft Wiki
Revision as of 13:35, 12 May 2008 by Bferrell (talk | contribs)
Jump to navigation Jump to search

Here are some Velocity's powered by Franklin engines.
Lincoln N126EE     Umeno N21HV
N126EE The intercooler exhaust. The foam is fairing work in progress. The Autronic is an electronic fuel injection/ ignition module. The coil packs and modules have not yet been installed. Nice picture of the turbocharger location. Behind it is the air filter. The throttle body still needs to be mounted between the two. Intercooler intakes on the belly. I may add an intake air scoop. If it performs well, and tufts indicate good characteristics, I'll leave them open. Another view of the turbo. Here you can see the pressure cap of the intercooler. Intercooler air intakes. The foam will be sanded down to make a fairing. Bosch throttle body.

  • N126EE

  • The intercooler exhaust. The foam is fairing work in progress.

  • The Autronic is an electronic fuel injection/ ignition module. The coil packs and modules have not yet been installed.

  • Nice picture of the turbocharger location. Behind it is the air filter. The throttle body still needs to be mounted between the two.

  • Intercooler intakes on the belly. I may add an intake air scoop. If it performs well, and tufts indicate good characteristics, I'll leave them open.

  • Another view of the turbo. Here you can see the pressure cap of the intercooler.

  • Intercooler air intakes. The foam will be sanded down to make a fairing.

  • Bosch throttle body.

Retrieved from "https://wiki.velocityoba.com/index.php?title=Franklin_Engine&oldid=3398"